<em id="j3fb7"><strike id="j3fb7"><i id="j3fb7"></i></strike></em>

      <big id="j3fb7"></big>

        <noframes id="j3fb7">

        過濾式系列離心機(Filter Centrifuge)

        PLBF系列平板直聯密閉全翻殼離心機(PLBF Series direct-connected driving shell-reversible centrifuge)

        文字:[大][中][小]

        PLBF系列
        平板直聯密閉全翻殼離心機

                 

        PLBF series
        direct-connected driving shell-reversible centrifuge

               PLBF系列離心機是一種適用于高潔凈生產、衛生級過濾離心機,廣泛用于制藥、食品、精細化工等行業的多種固液混合物分離。它具有制造工藝高,耐腐蝕性強,工作穩定、完全符合高衛生要求等顯著特點。
         
        PLBF series centrifuge meet the requirement of high cleanliness and sanitary filtering,also perform well in corrosion resistance. Application field:chemical industry,food industry,pharmaceutical industry,etc.
         

        ◎工作原理

                 

        Working principle

                待分離物料由進料管進入高速旋轉的離心機轉鼓,在離心力場的作用下,均布在轉鼓內壁的濾布上,進行過濾分離。分離過程中液相透過固相物料、濾布的縫隙和轉鼓壁上的小孔,從底盤的出液管流出;而固相物料則被截留在轉鼓壁內。達到分離要求后停機,開啟機蓋,人工用卸料,完成一個工作循環。
         
        Floating liquid come into drum trough feed tube,centrifugal force field makes solid phase spread evenly on filter cloth forms a cake.While liquid phase through gap between solid phase and filter cloth also holes of drum,discharge from liquid outlet of base.When it reaches expected effect,turns down the machine,opens lid,discharge material by human,then a whole working cycle has been finished.

        ◎主要特點

                 

        ◎Main features

        1、全密閉結構避免分離物料的交叉感染,內腔氮氣保護,滿足密閉防爆要求。
        2、特殊電機主軸與轉鼓直聯傳動,無皮帶摩擦帶來的粉塵污染。
        3、外殼可全翻,翻開角度大于90度,轉鼓整體外露,可觀察觸摸轉鼓底部,便于清潔、更換濾布。
        4、與物料接觸部分為不銹鋼,耐腐蝕性好。
        5、設備主要零部件表面均采用精密拋光處理,內部結構無死角,易清洗。
        6、可同時配備大翻蓋,快開結構。
         
         

        1)Fully sealed structure prevent material from cross infection,interior cavity nitrogen overload protection,explosion proofed.

        2)Unique motor shaft direct-connected driving with drum,free from dust pollution caused by belt friction.

        3)Totally reversible shell,turning angle is over than 90 degree,drum fully exposed facilitate cleaning and changing filtering cloth.
        4)Parts contact material is made of stainless steel,has a property of corrosion proof. feedback braking ensure safety.
        5)Critical parts surface is polished,interior structure without dead corner,easy to cleaning.
        6)Available reversible big lid and fast opening structure.

         ◎結構示意圖(Structure schematic diagram)

        ◎主要材料

                 

        ◎Composition of critical parts

        1、平板為Q235A包襯不銹鋼。
        2、轉鼓部件除轉鼓底為鑄鐵包襯不銹鋼外其余全部采用不銹鋼。
        3、軸承座采用鑄鋼件包襯不銹鋼。
        4、機殼、機蓋包括附屬品全部采用不銹鋼。
        5、直聯電機外部與物料接觸部分包襯不銹鋼。
        6、平衡缸采用不銹鋼制作。
         
          1)Flat plate is made of Q235A carbon steel coated by stainless steel.
        2)Drum base is made of cast iron coated stainless steel,other parts of drum is fully stainless steel.
        3)Bearing pedestal is made of cast iron coated stainless steel.
        4)Shell,top lid and belongings are made of stainless steel.
        5)Direct-connected motor parts contact material are coated stainless steel.
        6)Balance cylinder is made of stainless steel.

        ◎結構與配置(Structure and configuration) 

        項目(Item)
        標準(Ordinary )
        可選(Alternatives)
        整機結構
        (Whole machine set)
        平板式結構
        Flat plate
         
        轉鼓與物料接觸部分的材質
        (Drum contact with material part’s composition)
        SUS304不銹鋼
        SUS304 stainless steel
        SUS316、316L、321不銹鋼、鈦材、襯塑、襯HALAR、襯膠等
        Stainless steel:SUS316,SUS316L,SUS321;titanium;lining plastic;lining HALAR;lining rubber;etc.
        上蓋結構
        (Top lid)
        全翻殼
        Full turn shell
        翻殼+翻蓋
        Turn over the shell and cover
        上蓋附件
        (Top lid belongings)
        進料管、水洗管、視鏡、防爆燈、料位探測器
        Feed tube,washing tube,observation hole,explosion-proof lamp,material position detecto
        排氣孔、充氮口及其他結構要求
        Air outlet,nitrogen discharge hole unit or others
        翻殼方式
        (Turning shell mode)
        電動翻殼
        Electric turning shell
        氣動翻殼、液壓翻殼
        Pneumatic turning shell、Hydraulic turning shell
        開蓋方式
        (Lid opening)
        快開結構,平衡缸助力開蓋
        Fast opening structure,Balance cylinder facilitate opening
         
        布料方式
        (Distribution method)
        側向布料
        Side distribution
         
        電機種類
        (Motor type)
        普通電機
        Ordinary
        變頻電機、防爆電機、節能電機
        frequency-alterable,explosion-proof or energy saving
        制動方式
        (Braking method)
        能耗制動
        Dynamic braking
        回饋制動
        Feedback braking
        操控系統
        (Controlling system)
        變頻、手動
        frequency-alterable,manual
        PLC+HMI人機界面
        PLC+HMI
        安全防護(Safety technologies)
        振動保護、開蓋聯鎖保護、機電聯鎖保護、電機防護罩、 過載過熱保護
        Over vibration,opening interlock,Electromechanical interlocking protection,motor shield,overload,overheat
        轉速顯示、在線含氧檢測充氮保護系統
        Speed display,oxygen detection and nitrogen protection online system
        卸料方式
        (Discharge method)
        人工
        manual
         
        清潔處理
        (Cleaning)
        水洗清潔
        Washing,filter bag automatic remove unit
        在線清洗結構、高壓氣體反吹系統
        Online washing structure,high pressure air back flushing system
        其他
        (Others)
         
        其他配置要求

        ◎技術參數(Technical parameters)

        機型
        Model
        轉鼓直徑
        Drum D
        轉鼓高度
        Drum H
        轉鼓轉速
        Drum speed
        分離因數
        Separation factor
        最大容積
        MaximumVolumn
        最大裝料量
        Maxiumum load
        電機功率
        Motor power
        重量
        weight
        外形尺寸
        dimensions
        mm
        mm
        r/min
         
        L
        Kg
        KW
        Kg
        mm
        PLB800
        800
        400
        0-1500
        0-1000
        100
        135
        7.5
        1500
        1680×1200×1550
        PLB1000
        1000
        420
        0-970
        0-526
        140
        200
        11
        2400
        2050×1500×1600
        PLB1200
        1200
        500
        0-900
        0-545
        250
        350
        15
        3400
        2300×1800×1700
        PLB1250
        1250
        500
        0-900
        0-567
        300
        420
        15
        3500
        2300×1800×1700

        此為常用參數,具體產品所用參數根據用戶需要定制。
        Above are ordinary parameters,could tailored according to customer’s requirements.

         

        三级黄影片大全性爱视频 - 视频 - 在线观看 - 影视资讯 -心晴网