<em id="j3fb7"><strike id="j3fb7"><i id="j3fb7"></i></strike></em>

      <big id="j3fb7"></big>

        <noframes id="j3fb7">

        過濾式系列離心機(Filter Centrifuge)

        PD系列吊袋上卸料離心機(PD Series hanging bag top discharge centrifuge)

        文字:[大][中][小]

        PD系列
        吊袋上卸料離心機

                 

        PD series
        hanging bag top discharge centrifuge

                PD系列吊袋上卸料離心機是一種采用快裝式吊袋卸料方式、操作便捷省力的新型離心分離機械。該系列產品密閉性能好,分離脫水效果出色,適用于大多數固體顆粒粒徑在15微米以上的固液混合物。廣泛應用于化工、食品、制藥及其他行業領域。
         
        PD series hanging bag top discharge centrifuge,with quick-installed hanging bag,is a novel design.This centrifuge has pretty properties of sealed and dehydration,suit for treatment of most mixing solution contains particles diameter over than 15μm.Application field:chemical industry,food industry,pharmaceutical industry,etc.

        ◎工作原理

                 

        Working principle

                待分離物料由進料管進入高速旋轉的離心機轉鼓,在離心力場的作用下,均布在轉鼓內壁的濾布上,進行過濾分離。分離過程中液相透過固相物料、濾布的縫隙和轉鼓壁上的小孔,從底盤的出液管流出;而固相物料則被截留在轉鼓壁內。達到分離要求后停機,開啟機蓋,拔出吊欄鎖緊栓,用特制吊具將濾袋吊出機外定點卸料即完成一個工作循環。
         
        Floating liquid come into drum trough feed tube,centrifugal force field makes solid phase spread evenly on filter net forms a cake.While liquid phase through out from filter net also holes of drum,discharge from shell tangential outlet.When it reaches expected effect,turn down the machine,opens lid,unplugged  lift column bolt,use tailored device hangs out filter bag and conveys to fixed place for discharge,then a whole working cycle has been finished.

        ◎主要特點

                 

        ◎Main features

        1、全封閉結構設計,避免分離物料的交叉感染。
        2、機械式平衡缸開蓋設計,省力環保,翻蓋式外殼,便于清洗。
        3、采用快裝式吊袋卸料方式,卸料顆粒不易破碎。
        4、配套變頻程序控制系統,啟動平穩,能耗(反饋)制動,更安全。
        5、勞動強度低,工效高,通用性強,適用范圍廣。
         
         

        1) Fully sealed structure,protect material from cross infection.

        2) Mechanical balance cylinder opening design and reversible shell,easy to wash and friendly to environment.

        3) Adopts quick-installed hanging bag discharge,promote graininess ratio of product.
        4) Equipped with variable frequency program,smooth start,dynamic braking or feedback braking ensure safety.
        5) Lower labour intensity,higher efficiency,wider scope of application.

         ◎結構示意圖(Structure schematic diagram)

        ◎主要材料

                 

        ◎Composition of critical parts

        1、平板為Q235A包襯不銹鋼。
        2、轉鼓部件除轉鼓底為鑄鐵包襯不銹鋼外其余全部采用不銹鋼。
        3、機殼、機蓋包括附屬品全部采用不銹鋼。
        4、平衡缸采用不銹鋼制作。
        5、軸承座采用鑄鋼件(ZG230-450)。
         
          1)Flat plate is made of Q235A carbon steel coated by stainless steel.
        2)Drum base is made of cast iron coated stainless steel,other parts of drum is fully stainless steel.
        3)Shell,top lid and belongings are made of stainless steel.
        4)Balance cylinder is made of stainless steel.
        5)Bearing pedestal is made of cast iron(ZG230-450).

        ◎結構與配置(Structure and configuration) 

        項目(Item)
        標準(Ordinary )
        可選(Alternatives)
        整機結構
        (Whole machine set)
        平板式結構
        Flat plate
         
        轉鼓與物料接觸部分的材質
        (Drum contact with material part’s composition)
        SUS304不銹鋼
        SUS304 stainless steel
        SUS316、316L、321不銹鋼、鈦材、襯塑、襯HALAR、襯膠等
        Stainless steel:SUS316,SUS316L,SUS321;titanium;lining plastic;lining HALAR;lining rubber;etc.
        上蓋結構
        (Top lid)
        大翻蓋
        Entire reversible
        翻殼
        Turn over shell
        上蓋附件
        (Top lid belongings)
        進料管、水洗管、視鏡、防爆燈
        Feed tube,washing tube,observation hole,explosion-proof lamp
        排氣孔、充氮口及其他結構要求
        Air outlet,nitrogen discharge hole unit or others
        開蓋方式
        (Lid opening)
        快開結構,平衡缸助力開蓋
        Fast opening structure,Balance cylinder facilitate opening
         人工
        manual
        布料方式
        (Distribution method)
        側向布料
        Side distribution
        斜盤布料
        Slope dish
        電機種類
        (Motor type)
        普通電機
        Ordinary
        變頻電機、防爆電機、節能電機
        frequency-alterable,explosion-proof or energy saving
        制動方式
        (Braking method)
        能耗制動
        Dynamic braking
        回饋制動
        Feedback braking
        操控系統
        (Controlling system)
        變頻、手動
        frequency-alterable,manual
        PLC+HMI人機界面
        PLC+HMI
        安全防護(Safety technologies)
        振動保護、開蓋聯鎖保護、電機防護罩、  過載過熱保護
        Over vibration,opening interlock,motor shield,overload,overheat
        轉速顯示、防爆裝置、在線含氧檢測充氮保護系統
        Speed display,explosion-proof unit,oxygen detection and nitrogen protection online system
        卸料方式
        (Discharge method)
        人工
        manual
         
        清潔處理
        (Cleaning)
        水洗清潔
        Washing,filter bag automatic remove unit
        在線清洗結構
        Online washing
        三角皮帶
        (Triangular belt)
        普通三角皮帶
        Ordinary
        防靜電三角皮帶
        Static proof
        其他
        (Others)
         
        其他配置要求

        ◎技術參數(Technical parameters)

        機型
        Model
        轉鼓直徑
        Drum D
        轉鼓高度
        Drum H
        轉鼓轉速
        Drum speed
        分離因數
        Separation factor
        最大容積
        MaximumVolumn
        最大裝料量
        Maxiumum load
        電機功率
        Motor power
        重量
        weight
        外形尺寸
        dimensions
        mm
        mm
        r/min
         
        L
        Kg
        KW
        Kg
        mm
        PD800
        800
        400
        0-1200
        0-645
        100
        135
        7.5
        1200
        1650×1200×1350
        PD1000
        1000
        420
        0-1200
        0-850
        140
        200
        11
        2000
        2000×1500×1400
        PD1200
        1200
        600
        0-1000
        0-670
        340
        460
        15/18.5
        3000
        2200×1800×1500
        PD1250
        1250
        600
        0-1000
        0-698
        396
        538
        15/18.5
        3100
        2200×1800×1500
        PD1500
        1500
        700
        0-850
        0-605
        570
        800
        22
        5000
        2600×2200×1700
        PD1600
        1600
        850
        0-1000
        0-894
        795
        1080
        55
        9500
        3000×2300×2700
        PD1800
        1800
        770
        0-850
        0-728
        750
        1020
        37
        12000
        3300×2600×1900

        此為常用參數,具體產品所用參數根據用戶需要定制。
        Above are ordinary parameters,could tailored according to customer’s requirements.

         

        三级黄影片大全性爱视频 - 视频 - 在线观看 - 影视资讯 -心晴网